|
|
|
|
|
|
|
Where Do I Install My Unit?
|
If you have A/C we recommend installation above the coils. If you do not know
where they are look for a drain hose or copper lines entering your air duct.
This is where the coil is. You want to install the unit above this coil.
Because coils are always wet, even when the A/C is not running, it becomes a
breeding ground for bacteria, viruses, dust mites, and mold. The UV light
shining down on this coil burns all of these pathogens up.
DO NOT drill right into the duct where the drain or copper lines
are coming out. You must install it above the coil! If you run a drill
bit into this coil all the freon will come out and you will need an HVAC
contractor to open the duct and repair the coil, or even replace it.
A good idea is to drill a small inspection hole above where the coil is,
or even open the air duct to look at where it sits, so you know you've
installed it in the right spot.
If you do not have A/C you can install the unit easily in the cold air
return line, which is the duct that brings the air in the home or building to
the furnace so it can be heated. If you're in doubt, call a heating & air
conditioning company to install it for you. It doesn't cost much to have it
professionally installed. Install time is usually less than 15 minutes.
Maximum plenum temp is rated at 140F.
|
Yes Even The Drill Bits Are Included To Install Your Unit!
|
Very simple to install. Just Choose the place on the duct.
Place the stick-on template, center punch the color coded dots, then
drill the appropriate size holes.
Installation is that simple!
|
If this page is helpful please let your friends know how easy our units are to install
|
Easy To Install
|
Here's how to Install Airtronics 1 Lamp UV-C Air Purifier
|
We Now Ship to Canada!
$10.00 will deliver your unit to Canada!
Still have questions? Send them to me and I'll give you a hand.
|
|
|
|